Update: Please note that in August of 2019, this article was updated to reflect 200,000 simulations as opposted to the original 80,000, along with other applicable statistics.
Have you ever wondered if your match with your first cousin is “normal,” or what the range of normal is for a first cousin match? How would we know? And if your result doesn’t fall into the expected range, does that mean it’s wrong? Does gender make a difference?
If you haven’t wondered some version of these questions yet, you will eventually, don’t worry! Yep, the things that keep genetic genealogists awake at night…
Philip Gammon, our statistician friend who wrote the Match-Maker-Breaker tool for parental match phasing has continued to perform research. In his latest endeavor, he has created a tool that simulates the matching between individuals of a given relationship. Philip is planning to submit a paper describing the tool and its underlying model for academic publication, but he has agreed to give us a sneak peek. Thanks Philip!
In this example, Philip simulated matching between first cousins.
The data presented here is the result of 200,000 simulations:
Philip was interested in this particular outcome in order to understand why his father shared 1206 cM with a first cousin, and if that was an outlier, since it is not near the average produced from the Shared cM Project (2017 revision) coordinated by Blaine Bettinger.
Academically calculated expectations suggest first cousins should share 850 cM. The data collected by Blaine showed an actual average of 874 cM, but varied within a 99th percentile range of 553 to 1225 cM utilizing 1512 respondents. You can view the expected values for relationships in the article, Concepts – Relationship Predictions and a second article, Shared cM Project 2017 Update Combined Chart that includes a new chart incorporating the values from the 2016 Shared cM Project, the 2017 update and the DNA Detectives chart reflecting relationships as well.
Philip grouped the results into the same bins as used in the 2017 Shared cM Project:
The graph below is from the Shared cM Project tables.
Philip’s commentary regarding his simulations and The Shared cM Project’s results:
I’d say that they look very similar. The spread is just about right. The Shared cM data is a little higher but this is consistent with vendor results typically containing around 20 cM of short IBC segments. My sample size is more than 100 times greater so this gives more opportunity to observe extreme values. I observed 25 events exceeding 1410 cM, with a maximum of 1604 cM. At the lower end I have 787 events (about 0.4%) with fewer than 510 shared cM and a minimum of 272 cM.
I thought that the gender of the related parents of the 1st cousins would have quite an impact on the spread of the amounts shared between their children. Fewer crossovers for males means that the respective children of two brothers would be receiving on average, larger segments of DNA, so greater opportunity for either more sharing or for less. Conversely, the respective children of two sisters, with more crossovers and smaller segments, would be more tightly clustered around the average of 12.5% (855 cM in my model). There is a difference, but it’s not nearly as pronounced as I was expecting:
The most noticeable difference is in the tails. First cousins whose fathers were brothers are about two and a half times as likely to either share less than 8% or more than 17% than first cousins whose mothers were sisters. And of course, if the cousins were connected via a respective parent who were brother and sister to each other, the spread of shared cM is somewhere in between.
|% DNA shared between the respective offspring of…|
|1 brother, 1 sister||0.8%||9.2%||79.5%||9.1%||1.5%|
I receive a small contribution when you click on some of the links to vendors in my articles. This does NOT increase the price you pay but helps me to keep the lights on and this informational blog free for everyone. Please click on the links in the articles or to the vendors below if you are purchasing products or DNA testing.
Thank you so much.
DNA Purchases and Free Transfers
- Family Tree DNA
- MyHeritage DNA only
- MyHeritage DNA plus Health
- MyHeritage FREE DNA file upload
- 23andMe Ancestry
- 23andMe Ancestry Plus Health
- Legacy Tree Genealogists for genealogy research
Hi Roberta,interesting.I want to develop this into the children of a 1st cousin marriage.My paternal grandfather’s parents were 1st cousins.One female,the other male.His father and her mother were siblings.what effect does this have on the inheritance of DNA in view of what you have previously written that”you can inherit an entire segment of an ancestor’s DNA,or none at all”None of the succeeding generations seem to have resembled the greatgrandfather very much.Does this inbreeding cause mutations in DNA which are significant?
How is the X chromosome included in these studies?
The only company who uses the X is 23andMe. My least favorite company, but the only one that utilizes the X properly. FTDNA and AncestryDNA matching algorithm does not use the X to find matches.
There is less crossover between brothers, but sisters share more DNA due to two Xs. Each sister carries the full X from the father, and thus a complete Half Identical X. Plus a some Half Identical X from the mother. Making some Full Identical X segments between the two sisters.
This would obviously not include the X because of the inheritance pattern. FTDNA does include the X, but only if the threshold is exceeded with other matches first. That’s probably a good thing, because in most cases, you need about twice as many cM for the X to be as reliable or informative as the other autosomes. Many false X matches. So X alone, no they don’t.
The X chromosome was included in the simulations but the article is just showing results for the 22 autosomal chromosomes. The X is quite a bit more complicated as there are quite a few first cousin pairs that cannot share X segments because one or both of them inherited a Y chromosome from the common grandparents.
I compared my DNA with two of my first cousins using Ancestry DNA. They are brother and sister and fathers were male. I share 812 cms with my male cousin and 1008 cms with my female cousin.
2 first cousins. Their mom was Daddy’s only sister. 999/39 with one and 990/35 with the other.
The more extreme results with children of brothers; I can’t remember where I read it, but apparently recombination occurs less frequently in men than in women (about 20 times vs. 30 times), so that would fit; two children of brothers then would inherit larger unrecombined segments from their father, which then have both a larger chance to overlap, and to not overlap.
Precisely! The difference in the recombination rates between the genders is what drives the variation. There have been many scientific studies and they all point to an average of around 27 crossovers in male meiosis and an average of around 42 crossovers in female meiosis.
My first cousin shares 1513 centimorgans with me. Our fathers were brothers. I’m male, my cousin is female. This is well outside the range of the above graphs. FTDNA predicted we are half-siblings but we are not.
Fortunately we know the answer from other sources. Our grandparents were rather more closely related than was legal, so we got a double helping of the same DNA from them.
Which makes us, I suppose, sort of double cousins. I wonder how many other incestuous relationships there are at the margins of these ranges.
Yes, unknown ones. That’s why Blaine used the 95th and 99th percentile numbers in the Shared cM Project.
I should point out that in the simulations my assumption is that there is no genetic relationship between the two grandparents that are common to the first cousins. And also no genetic relationship between the two spouses of the cousins’ parents, either to each other or to their respective spouses. So all of the results presented describe only the shared DNA that first cousins receive from their common grandparents. Any additional shared ancestral paths could add to the amount of matching DNA that is shared between cousins.
I was wondering if you ever submitted a paper describing the tool and its underlying model for academic publication. If so, is there a link to the paper online? Also, I am curious how long your simulator took to run 80000 experiments as described in this blog post and what language you used for programming the simulation.
I still haven’t written the paper. There have been too many interesting distractions in my own family tree research! But a New Year’s resolution is to submit a paper this year.
The simulator only took about 10 or 15 minutes to run 80,000 simulations. It’s a little slower now as I have extended it out to 4th-cousins.
The model is an Excel spreadsheet. Triggering the spreadsheet to recalculate performs another simulation. There are no macros, no VB code which is why it is so fast. The results of the simulations are simply stored in a Data Table.
I am trying to trace my birth father who was an American Serviceman in the 2nd World War. I have found a supposed 1st cousin with the shared centimorgans of 1121 – 45 segments. Would she definitely be my 1st cousin as we are roughly the same age?
You’ll want to use the chart in this article and look at additional information, like location, etc. https://dna-explained.com/2017/09/21/shared-cm-project-2017-update-combined-chart/
Hello i was adopted. Through Ancestry Dna I have found that I share 1557 centimorgans with someone. I cannot be their aunt, grandparent or first cousin so think I must be their half sibling.
I want to try to be certain so wonder if you can advise? Is there any other possibility, for instance supposing first cousins had married at some point during our ancestry. Thank you very much
Hi i have done my DNA through Ancestry, it shows my First cousin with Cm count of 327? So is he my FULL 1st cousin? I know for a fact we share the same Grand Mother but, can’t be certain at the moment if we actually share the same Grand Father as another older Uncle has a different father, so not sure of my cousins Grandfather. SO confused here
Use the tool at DNAPainter to look at the probable relationships.
I recently received the results of my father’s Big Y from FamilyTree and his first cousin is still awaiting his. Meanwhile, his cousin received his Y-111 results which state that they have a genetic distance of 7. I called and spoke with someone at FamilyTree and he said that this isn’t unheard of although not common. My father’s cousin should be receiving his Big Y results sometime in July or maybe by the end of June. What do you think?
I don’t speculate. 😁
Oh if I had waited a day to write! My Dad’s cousin’s autosomal DNA results came back yesterday from FamilyTree. He and my Dad do have a genetic distance of 7 but they have 880cM, longest block is 121 and 41 shared segments.